配件

配件

LED-IsetCurrent setting resistors

Plastic-encased and robust resistors for adjusting the LED driver current output

  • Compact size to fit inside strain reliefs
  • Basic isolated
  • Helvar LED-Iset resistors are adjusted to follow the LEDset current/resistance settings values
  • Suitable only for LED-Iset or LEDset drivers
下载数据表
IsetCurrent setting resistors

Plastic-encased and robust resistors for adjusting the LED driver current output

  • Compact size to fit inside strain reliefs
  • Basic isolated
  • Designed for Helvar LED drivers with Iset current setting resistor interface
  • Suitable for any LED driver with adjustable current by resistor of specific resistance
下载数据表
下载和链接
LC-SRAClick-on strain relief for LED drivers

This easy to assemble click-on strain relief can be used together with a LED driver when the driver needs to be safely installed outside of a luminaire.

  • Easy installation with screwless cable clamps
  • Sturdy structure, compatible with cables of different thickness
下载数据表
LC-SRA-LOOPClick-on strain relief for LED drivers

This easy to assemble click-on strain relief can be used together with a LED driver when the driver needs to be safely installed outside of a luminaire.

  • Enables looping of the input cables for Helvar compact LED drivers
  • Easy installation with screwless cable clamps
  • Sturdy structure, compatible with cables of different thickness
下载数据表
LL1x2135-SRClick-on strain relief for LED drivers

This innovative accessory enables independent installation of compatible 35 mm wide metal case LED drivers

  • Easy installation
  • Sturdy structure, compatible with cables of different thickness
  • Please see the datasheet for application guidance
下载数据表
LC1x30-SR用于LED 驱动的卡扣式卡线槽

当驱动要被安全地安装在灯具外部时,该款易于安装的卡扣式卡线槽能与LED 驱动一起使用。

  • 完全可调节的电缆松紧
  • 坚固简单的构造
LL1x40-SR用于LED 驱动的卡扣式卡线槽

当驱动要被安全地安装在灯具外部时,该款易于安装的卡扣式卡线槽能与LED 驱动一起使用。

  • 包括室内电缆夹的螺丝
  • 电缆夹支持不同电缆厚度
  • 每套包裹包含2套卡线槽
LC1x70-SR用于LED 驱动的卡扣式卡线槽

当驱动要被安全地安装在灯具外部时,该款易于安装的卡扣式卡线槽能与LED 驱动一起使用。

  • 包括室内电缆夹的螺丝
  • 电缆夹支持不同电缆厚度
LL1-CV-DA12-24 V 可调恒压 DALI LED 驱动分机

使用欧华CV驱动创造装饰性照明方案

  • DALI 控制输入, 0.1 %-100 % 调光范围
  • 1 kHz PWM 调光频率
  • 备用电源 < 0.1 W
  • 双端口用于平行接线
  • 更多信息: Constant voltage solution
下载数据表
LL1-CV-SC12 V – 24 V Dimmable constant voltage Switch-Control LED driver extension

Use with Helvar CV drivers to create decorative lighting solutions

  • Switch-Control input, 0.1 % – 100 % dimming range
  • 1 kHz PWM dimming frequency
  • Stand-by power < 0.1 W
  • Duplicated terminals for parallel connection
  • 更多信息: Constant voltage solution
下载数据表
下载和链接
LMCLED Module covers

These module covers provide protection from electrical parts of the module in luminaire installations as well as diffusion to achieve more uniform light.

  • Clear version or then opal and matt opal polycarbonate profiles with high light transmission rates
  • Sturdy screwable mounting parts for installing the covers
  • Optical diffusion in the opal versions for glare reduction and even light distribution
  • Perfect fit for LS modules and combinations, available in three lenghts, custom lengths possible on demand
下载数据表
Active+ Sense RectangularSensor holder

Accessory for mounting the Active+ Sense sensor to the luminaire

  • Easy installation
  • Suitable for either flush or surface mounting of Active+ Sense sensor
  • Sturdy structure, internal strain relief
  • Available in white or grey
下载数据表
下载和链接
Active+ Sense CircularSensor holder

Accessory for mounting the Active+ Sense sensor to the ceiling

  • Easy installation
  • Suitable for flush mounting
  • Sturdy structure, internal strain relief
  • Available in white or grey
下载数据表
下载和链接

Do you know your browser is out of date?

For the best experience using our web site, we recommend upgrading your browser to a newer version or switching to a supported browser.

To update your supported browser click here: Chrome, Internet Explorer, Firefox.

×