Minisensor3 (Discontinued)
Minisensor3 (Discontinued)
The Helvar Minisensor3 is a two channel luminaire-mounted component
containing three integrated sensors: Presence detector (PIR), constant light sensor and infrared (IR) receiver.
- Device Mounting Method: Luminaire
- Sensor Mounting Method: Luminaire
- Colour: White
Detection
| Detection diameter (m) | 4.5 |
|---|---|
| Sensing technology |
|
| Nominal mounting height (m) | 3 |
Compatible products
| Compatible products |
|---|
Operation
| IR receiver for remote control | ✓ |
|---|
You May Also Like
Small luminaire-based device that combines a passive infrared (PIR) sensor and light sensor. For use with ActiveAhead Generation 2018 and Active+ solutions.
- Lighting Control Protocol: Wireless lighting control
- Device Mounting Method: Luminaire
- Sensor Mounting Method: Luminaire
- Colour: White
IP65 rated multisensor for use with ActiveAhead Nodes, enabling unique self-learning capabilities. Follows the Zhaga Book 20 mechanical dimensions for a rectangular sensor suiting a 44×17 mm slot.
- Lighting Control Solution: ActiveAhead
- Lighting Control Protocol: Wireless lighting control
- Device Mounting Method: Luminaire
- Sensor Mounting Method: Luminaire
- Colour:
Light grey
White
Extremely small multisensor for use with ActiveAhead Nodes, enabling unique self-learning capabilities. Can be used inside a luminaire together with an ActiveAhead Node, or outside a luminaire, through ActiveAhead Node Advanced with a circular sensor holder.
- Lighting Control Solution: ActiveAhead
- Lighting Control Protocol: Wireless lighting control
- Device Mounting Method: Luminaire
- Sensor Mounting Method: Luminaire
- Colour:
White
Anthracite grey