- Compact ceiling-mount unit
- Energy saving function
- Presence detection (PIR)
- Constant light sensor
- Infra-red receiver
- Switch-Control input
Sensors
Sensors
Helvar offer a range of sensors, for luminaire mounting or standalone use. The sensors provide additional energy savings to Helvar electronic controllable ballasts, as well as automatic lighting control.
DIGIDIM 312 Multisensor
iDim Sense
- Compact DALI sensor works with all iDim ballasts and drivers
- Used with iDim Solo, provide 2-channel control
- PIR motion sensor, Constant Light with offset, & Infra-red Receiver
- Simple rotating selector provides 6 pre-programmed modes
- Easy click-mounting from outside luminaire
- Clip-on PIR restrictor
316 - for standalone use
315 - for system use (using toolbox or router)
MIMO3 Light Sensor
- Very small profile
- Easy installation – simply clips to T5 or T8 tube
- Simple setting of the constant light level
- Start up at full level
- Controls up to 15 Helvar electronic ballasts
- Supply voltage derived from the ballast
- Smooth dimming operation, 1.5 minute settling time
- Compatible with all Helvar 1-10 V ballasts and drivers
MIMO2 Light Sensor
- A cylindrical light sensor
- Can be fitted into a luminaire casing
- Compatible with all Helvar 1-10V ballasts and drivers.
- Simple setting of the constant light level
- Startup at full level
- Controls up to 15 Helvar 1-10V ballasts/drivers
- Supply voltage derived from the ballast
Minisensor3
- A luminaire-mounted sensor, providing two channel control
- Presence detector (PIR)
- Constant light sensor
- Infrared (IR) receiver.
- Compatible with all iDim ballasts and drivers
μDim PIR Switching Sensor
- The SL-PIR-SW miniature PIR presence detector provides automatic control of lighting loads
- Supplied with flush-mount bracket and power supply.
- PIR motion sensor - 5m range
- Bright-out feature
- Relay output for 230V switching (2A max)
- IR receiver for programming/control
μDim PIR 1-10V Sensor
- The SL-PIR-AN miniature PIR presence detector provides automatic control of lighting loads
- Supplied with flush-mount bracket and power supply.
- Microwave motion sensor - 8m range
- Constant light
- Controls up to 4 Helvar 1-10V ballasts/drivers
- Relay output for 230V switching (2A max)
- IR receiver for programming/control
μDim Microwave Switching Sensor
- The SL-MW-SW miniature microwave presence detector provides automatic control of lighting loads
- Supplied with flush-mount bracket and power supply.
- Microwave motion sensor - 8m range
- Suitable for mounting inside a luminaire (behind glass/plastic)
- Bright-out feature
- Relay output for 230V switching (2A max)
- IR receiver for programming/control
μDim Microwave 1-10V Sensor
- The SL-MW-AN miniature microwave presence detector provides automatic control of lighting loads
- Supplied with flush-mount bracket and power supply.
- Microwave motion sensor - 8m range
- Suitable for mounting inside a luminaire (behind glass/plastic)
- Constant light
- Controls up to 4 Helvar 1-10V ballasts/drivers
- Relay output for 230V switching (2A max)
- IR receiver for programming/control
μDim Microwave DALI Sensor
- The SL-MW-DA miniature microwave presence detector provides automatic control of lighting loads
- Supplied with flush-mount bracket and power supply.
- Microwave motion sensor - 8m range
- Suitable for mounting inside a luminaire (behind glass/plastic)
- Constant light
- Controls up to 4 Helvar iDim ballasts/drivers
- Relay output for 230V switching (2A max)
- IR receiver for programming/control
μDim IR Programmer
- The SA-IR-PROG is a compact infrared handset used for the programming of μDim sensors
- Set the time delay
- Set the lux level (for constant light or bright out feature)
- Adjust sensitivity for microwave motion detector
- Manual switching/dimming control
Title
Sensors
English
